Fire Apparatus Driver/Operator: Pump, Aerial, Tiller, And Mobile Water Supply 3rd Revised edition

The National Fire Protection Association (NFPA) and the International Association of Fire Chiefs (IAFC) are pleased to bring you Fire Apparatus Driver/Operator: Pump, Aerial, Tiller, and Mobile Water Supply, Third Edition. This third edition of Fire Apparatus Driver/Operator has been thoroughly updated to serve as a complete training solution that addresses pump operation, safe driving techniques, tiller and aerial apparatus operation, and water supply considerations. From basic apparatus maintenance to fire pump theory and advanced hydraulic calculations, this single manual covers everything a fire service driver/operator needs to know. Fire Apparatus Driver/Operator: Pump, Aerial, Tiller, and Mobile Water Supply, Third Edition meets and exceeds the job performance requirements of Chapters 4, 5, 6, 7, and 10 of the 2017 Edition of NFPA 1002, Fire Apparatus Driver/Operator Professional Qualifications. In the 2017 edition, the requirement that a Driver/Operator be certified to the Firefighter I level was removed. However, JPR's from NFPA 1001 have been added so driver operators who operate pumpers and mobile water supply apparatus are able to operate outside of the IDLH but still have an understanding of the following fire fighter I topics: • Fire Department Communications (NFPA 1001: 5.2.1, 5.2.2, 5.2.3)• The General Knowledge Requirements (NFPA 1001: 5.1.1)• Responding on an Apparatus to an Emergency Scene (NFPA 1001: 5.3.2)• Connect a Fire Department Pumper to a Water Supply (NFPA 1001: 5.3.15)Additional appendices include the excerpt of NFPA 1002 and corresponding correlation matrixes to substantiate all job performance requirements are covered and documented. Comprehensive and updated content in the third edition includes:• Nozzle reaction and how to calculate it• Expanded coverage of pump anatomy and pressure control devices• Addresses vital parts of NFPA 1901: Standard for Automotive Fire Apparatus and NFPA 1911: Standard for the Inspection, Maintenance, Testing, and Retirement of In-Service Automotive Fire Apparatus. • Appendix A: Daily/Weekly Inspection Check Sheet provides a comprehensive overview on what to check and how to check your apparatus for operational readiness.Live Fire Training: Principles and Practice to NFPA 1403, Second EditionAll fire fighters need the safe and controlled "real life" training offered through live fire exercises in order to be fully prepared for the hazards of the fireground. Live Fire Training: Principles and Practice, Second Edition provides a definitive guide on how to ensure safe and realistic live fire training for both students and instructors. Updated to address all the requirements for NFPA 1403, Standard on Live Fire Training Evolutions, 2018 Edition, including the following new requirements: • Prerequisites for all live fire training participants• Fire Dynamics • Health and Safety • Fundamentals of Fire Behavior• Fire Development in a Compartment • Nozzle Techniques and Door Control• Documentation of Prescribed Minimum Training• How to Develop Ventilation-Controlled Evolutions• Instructors shall meet the requirement of Fire Instructor I and Instructors-in-Charge shall be Fire Instructor II according to NFPA 1041. Detailed instructions on preparing for live burns in acquired structures, using gas-fired and non-gas-fired permanent structural props, exterior live fire props and also mobile enclosed live fire training props. And finally, Incident Reports of actual live fire training accidents are included with a summary of the lessons learned.