WRC triibulised autokatted vinüülkile PVC võidusõiduspordikleebised autokleebised pea tagaküljele, peegli külje kere triibuline auto voolimine

WRC Stripe Car Covers Vinyl Film PVC Racing Sports Decals Car Stickers For Head Rearivew Mirror Side Body Stripe Car Stying Product Name: WRC latticeHead /cover Rearivew Mirror Side Stripe StickersBody DecalFeatures:Easy and inexpensive way to upgrade your vehicle's exteriorWaterproof, Fade-resistant, self-adhesiveIt will give your car an elegant and luxury looksStrong visual impactEasy cleaning & maintenanceDIY your own personalized carSpecifications:Material: PVCColor: Black/White/Red/Yellow/BlueSize: 220 * 25cm, one side, the whole set on both sides of the car body~Applicable car system: general modelInstallation:1. Clean paste position;2. Move away the bottom paper on the back;3. Adjust the position and paste;4. Scrape stickers leveling bubble;5. Move away the transfer film carefully;6. Finish. Don't wash your car in 3 days.Note:1. (IMPORTANT) No Instructions Included. Professional Installation Is Highly Recommended!2. Please check the size measurement chart carefully .3. Please allow 1-2cm difference due to machinized cut4. The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.5.Large quantity can communicate price with customer service.Package Contents:1x Car Hood Sticker,1x Car sides sticker,1xCar Rearivew Mirror sticker. 1. Clean the body and keep it dry. 2. In general, first tear the bottom to determine the position to be pasted, and then slowly tear the bottom paper while scraping with a tool (the tool can be bank card). 3. If the figure is not large (less than 20cm), you can also tear off all the backing paper before pasting. But we must pay attention to tear it slowly, and be careful not to stick the car stickers down or cause accidental adhesion. 4. After affixing, repeatedly scrape and press for several times, and slowly tear off the transparent transfer film. 5. Done. (do not wash the car for 2-3 days)2, Pasting methods of medium-sized stickers (such as door stickers, map stickers, spare tire stickers, etc.):1. Clean the body and keep it dry. (don't do it in the strong wind, rain or sun, you can choose the shelter in the garage, etc.) 2. First tear the bottom to determine the position to be pasted, and then slowly tear the bottom paper while scraping it with a tool (the tool can choose the bank card). 3. But we must pay attention to tear it slowly, and be careful not to stick the car stickers down or cause accidental adhesion. 4. After affixing, repeatedly scrape and press for several times, and slowly tear off the transparent transfer film. 5. Done. (do not wash the car for 2-3 days, two people are recommended)3, Large car stickers:1. The large stickers are rolled up for delivery when they are delivered. If there are some bubbles or wrinkles in the bottom paper and transfer film of the stickers, please note that this is normal and does not affect the car stickers. Before the stickers are pasted, the car stickers should be laid on a flat desktop and scraped with a scraper (bank card). 2. It is suggested to go to car beauty salon and ask for help. Choose a do it yourself buyer, suggest posting home to consult the seller. Methods: (dry or wet sticking can be used)(1) Dry paste method: (the following method is used for the whole big paste, and the following method is not used for collage) 1. Clean the car body and keep it dry. (don't do it in the strong wind, rain or sun, you can choose the shelter in the garage, etc.) 2. First, compare the car on the car, determine the position to be pasted, and try to avoid the concave and convex or difficult position. 3. Then you can take a little tape or cut off the transfer film to fix the car stickers and start to paste. 4. First, tear off the bottom from the front of the car to determine the position to be pasted, and then slowly tear off the bottom paper while scraping with a tool (the tool can be bank card). 5. But we must pay attention to tearing slowly, not leaving bubbles, and not sticking the car stickers or causing accidental adhesion. 6. After pasting, repeatedly scrape and press for several times, and slowly tear off the transparent transfer membrane. 7. At the beginning of the later work, first cut the middle of the door with a knife (gap or opening position), and stick it inward. 8. If there are bubbles, you can try to scratch them again. The big bubbles can be broken directly. If there are small bubbles, you can wait a few days before they are fully bonded. 5. Be sure to check it again when you are finished. (don't wash the car for 2-3 days, 2-3 people are recommended)(2) Wet sticking method - car stickers or large car stickers are applicable [it is recommended to take them to the car beauty shop] steps of wet sticking method - tools: watering can, clean rag, scraper, art knife, air duct 1. After cleaning the car body, spray water with the watering can on the body part to be pasted & mdash; & mdash; is mainly used to reduce the viscosity of the sticker and facilitate the adjustment of the position. 2. After determining the position to be pasted, remove the transfer film (transparent adhesive film pasted on the reflective sticker) and the vehicle sticker from right to left [or from top to bottom] and press them on the vehicle surface with a rag, then paste, press flat with a rag and uncover the bottom paper at the same time. 3. In case of door handle or anti-collision strip, the material shall be cut and wrapped or loaded according to the situation. 4. Adjust the general position of the figure in time, and then wipe off the water and bubbles repeatedly with the scraper. When using the scraper, scrape diagonally from right to left. Finally, tear off the transparent transfer film. 5. In case of the door and the seam, use the art knife to divide them and stick them inward. 6. Try to let the moisture in the car stickers dry completely. If possible, it can be heated and dried moderately with the air duct.Strong requirements: do not expose to the sun within 24 hours, and do not wash the car within 48 hours.How to clean up:Gently blowing nail stickers edge, then the tear, will not leave marks will not damage the car paint. If it is cold in winter to sweep the corner, hair dryer available to appropriate heating tape, glue can be easily removed after the soft thaw.Matters needing attention:1. Don't wax a week before you decide to dress up as a car lover. Wax will make stickers stick tightly. Don't wash your car within three days after sticking, don't stick it on rainy and cloudy days. This will not work well.2, such as stickers affixed to the door or other activities, don't worry, good paste can be cut with a sharp knife.3, if they really do not want to do it, please go to the local area to ask for help.