1

Code of Practice for Building Automation and Control Systems

Täpsustused:
Autor: The Institution of Engineering and Technology
Lehekülgede arv: 172
Ilmumisaasta: 2020
Kauba ID: 16368829
Ainult äpis! Saad kuni 4x rohkem Kaup24-eurosid!*
  • Täishind
  • Maksa osade kaupa 819 x 18 kuus
10675
10675
819 / kuus
või
3 3559
Ilma lisatasudeta
Lisa korvi
Sinu linn

Omniva pakiautomaat

30. juunist

000

SmartPosti pakiautomaat

30. juunist

000

Unisend pakiautomaat

30. juunist

000

Kuller

30. juunist

399

Tähelepanu! Tarneajad on esialgsed ning selguvad pärast tellimuse vormistamist ja tasumise aega. Lõplik tarnekuupäev on märgitud tellimuse kinnituses.

Omniva pakiautomaat

30. juunist

000

SmartPosti pakiautomaat

30. juunist

000

Unisend pakiautomaat

30. juunist

000

Kuller

30. juunist

399

Tähelepanu! Tarneajad on esialgsed ning selguvad pärast tellimuse vormistamist ja tasumise aega. Lõplik tarnekuupäev on märgitud tellimuse kinnituses.

  • 95% ostjatest soovitaks seda müüjat.

Toote kirjeldus: Code of Practice for Building Automation and Control Systems

Within the modern built environment, advanced engineering systems allow us to go about our daily lives in a relative degree of safety, comfort and security. Often, we do not give too much thought about what is happening behind the scenes. Every engineering system needs an energy source and control input to provide the service it is designed for. Without some degree of management, those engineering systems may not perform quite as intended. It is often unreliable to depend solely on building occupiers to satisfactorily control these engineering systems purely by manual means, and hence make the best use of the engineering systems for the benefit of all. The aim of this Code of Practice is to provide knowledge, understanding and good practice guidance on the design, evaluation, implementation and improvements on the use of automated controls used in mechanical and electrical engineering systems within the built environment. The Code of Practice also aims to provide clear and concise information on building automation and control systems that can be developed and applied to several different installations. There is often no single solution and therefore building controls must be specifically tailored to meet specific user needs, local technical requirements and the constraints of budget and resources.
The aim of this Code of Practice is to provide knowledge, understanding and good practice guidance on the design, evaluation, implementation and improvements on the use of automated controls used in mechanical and electrical engineering systems within the built environment.

Üldine tooteinfo: Code of Practice for Building Automation and Control Systems

Kauba ID: 16368829
Kategooria: Ühiskonnateemalised raamatud
Tootepakendite arv: 1 tk.
Paki suurus ja kaal (1): 0,03 x 0,16 x 0,24 m, 0,3 kg
Kirjastus: Institution of Engineering and Technology
Raamatu keel: Inglise keel
Kaane tüüp: Pehme
Vorming: Traditsiooniline raamat
Tüüp: Sotsiaalteaduste raamatud
Raamat väljavõttega: Ei
Autor: The Institution of Engineering and Technology
Lehekülgede arv: 172
Ilmumisaasta: 2020

Toodete pildid on illustratiivsed ja näitlikud. Tootekirjelduses sisalduvad videolingid on ainult informatiivsetel eesmärkidel, seega võib neis sisalduv teave erineda tootest endast. Värvid, märkused, parameetrid, mõõtmed, suurused, funktsioonid, ja / või originaaltoodete muud omadused võivad nende tegelikust väljanägemisest erineda, seega palun tutvuge tootekirjeldustes toodud tootespetsifikatsioonidega.

Partnerite pakkumised
Reklaam

Hinnangud ja arvustused (0)

Code of Practice for Building Automation and Control Systems
Jäta esimene arvustus!
Toote hindamiseks pead olema sisse logitud ja toote Kaup24.ee e-poest eelnevalt ka ostnud.
Hinda toodet

Küsimused ja vastused (0)

Küsi toote kohta teistelt ostjatelt!
Esita küsimus
Teie küsimus on edukalt saadetud. Sellele küsimusele vastatakse 3 tööpäeva jooksul
Küsimus peab olema vähemalt 10 tähemärki